SWMM3, SWMM4 Conversion Tools for SWMM5
Conversion Tools for the SWMM 3, 4 and 5 Programs for SWMM 5.0.016
EMC Steps
There are four steps to using EMC concentrations in your network:
1. Define your pollutant by adding a pollutant using the Data=>Quality=>Pollutant command:
2. Define the Land Use by using the Data=>Land Uses command or the Land Use Editor:
3. Define Buildup to be None by clicking on the None Tab:
4. Define the EMC Washoff concentration by clicking on the Washoff Tab:
1. Define your pollutant by adding a pollutant using the Data=>Quality=>Pollutant command:
2. Define the Land Use by using the Data=>Land Uses command or the Land Use Editor:
3. Define Buildup to be None by clicking on the None Tab:
4. Define the EMC Washoff concentration by clicking on the Washoff Tab:
About
Latest Activity
Welcome Leo!
Step 1: Open up or run the converter
Step 2: Define your text editor if you want to use the Edit Button
Step 3: Define the programs ini file if you want to use it multiple times
Step 4: Click on Select to convert either ...
.
.
SWMM 3, 4 to 5 Converter
SWMM 3,4 to 5 Converter Interface
The SWMM 3 and SWMM 4 converter can convert up to two files at one time to SWMM 5. Typically you would convert a Runoff and Transport file to SWMM 5 or a Runoff and Extran File to SWMM 5...
© 2009 Created by Robert E Dickinson on Ning. Create Your Own Social Network
